進口電動真空蝶閥德國洛克型號齊全 

一、進口電動真空蝶閥產品簡介：

德國《LOCKE》洛克進口電動真空蝶閥是適用于真空系統中接通或切斷管路的介質流。 該閥采用回轉型電動、電子調節式閥門驅動裝置，可以通過外接電源的切換(用手動轉位開關或電腦控制)或外部輸入信號，來實現閥門開、關或中間位置的控制。閥門的閥板采用夾緊結構，把閥板的密封圈來夾緊，除了能用在真空狀態下，也能在低壓狀態下使用。并可以任意位置安裝。 適用的工作介質為空氣和非腐蝕性氣體。

Locke imported electric vacuum butterfly valve is suitable for connecting or cutting off the medium flow in the vacuum system. The valve adopts rotary electric and electronic regulating valve driving device, which can realize the control of valve opening, closing or middle position through the switch of external power supply (controlled by manual position switch or computer) or external input signal. The valve plate of the valve adopts the clamping structure to clamp the sealing ring of the valve plate, which can be used not only in the vacuum state, but also in the low pressure state. And can be installed anywhere. The applicable working medium is air and non corrosive gas.

二、進口電動真空蝶閥產品特點:

1、啟閉方便迅速、省力、流體阻力小，可以經常操作。

2、結構簡單，外形尺寸小，結構長度短，體積小，重量輕，適用于大口徑的閥門。

3、可以運送泥漿，在管道口積存液體最少。

4、低壓下，可以實現良好的密封。

5、調節性能好。

6、全開時閥座通道有效流通面積較大，流體阻力較小。

7、啟閉力矩較小，由于轉軸兩側蝶板受介質作用基本相等，而產生轉矩的方向相反，因而啟閉較省力。

8、密封面材料一般采用橡膠、塑料、故低壓密封性能好。

9、安裝方便。

10、操作靈活省力，可選擇手動、電動、氣動、液壓方式。

1. The opening and closing is convenient, quick, labor-saving, low fluid resistance, and can be operated frequently.

2. Simple structure, small size, short length, small volume, light weight, suitable for large caliber valves.

3. It can transport mud and store the least liquid at the pipe mouth.

4. Under low pressure, good sealing can be achieved.

5. Good regulation performance.

6. When the valve is fully opened, the effective flow area of the valve seat channel is larger and the fluid resistance is smaller.

7. The opening and closing torque is small, because the disc on both sides of the shaft is basically the same under the action of the medium, and the direction of the torque is opposite, so the opening and closing is more labor-saving.

8. The sealing surface material is generally rubber and plastic, so the low-pressure sealing performance is good.

9. Easy to install.

10. Flexible and labor-saving operation, manual, electric, pneumatic and hydraulic modes can be selected.

三、進口電動真空蝶閥安裝于維護：

1、在安裝時，閥瓣要停在關閉的位置上。

2、開啟位置應按蝶板的旋轉角度來確定。

3、帶有旁通閥的蝶閥，開啟前應先打開旁通閥。

4、應按制造廠的安裝說明書進行安裝，重量大的蝶閥，應設置牢固的基礎。

5、蝶閥的蝶板安裝于管道的直徑方向。在蝶閥閥體圓柱形通道內，圓盤形蝶板繞著軸線旋轉，旋轉角度為 0°~90° 之間，旋轉到 90° 時，閥門則牌全開狀態。

6、如果要求蝶閥作為流量控制使用，主要的是正確選擇閥門的尺寸和類型。蝶閥的結構原理尤其適合制作大口徑閥門。蝶閥不僅在石油、煤氣、化工、水處理等一般工業上得到廣泛應用，而且還應用于熱電站的冷卻水系統。

7、常用的蝶閥有對夾式蝶閥和法蘭式蝶閥兩種。對夾式蝶閥是用雙頭螺栓將閥門連接在兩管道法蘭之間，法蘭式蝶閥是閥門上帶有法蘭，用螺栓將閥門上兩端法蘭連接在管道法蘭上。

8、蝶閥的蝶板安裝于管道的直徑方向。在蝶閥閥體圓柱形通道內，圓盤形蝶板繞著軸線旋轉，旋轉角度為 0°~90° 之間，旋轉到 90° 時，閥門則牌全開狀態。

1. During installation, the disc shall be stopped at the closed position.

2. The opening position shall be determined according to the rotation angle of butterfly plate.

3. For butterfly valve with bypass valve, the bypass valve shall be opened before opening.

4. The installation shall be carried out according to the installation instructions of the manufacturer. The heavy butterfly valve shall be provided with a firm foundation.

5. The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis, with the rotation angle between 0 ° and 90 °. When it rotates to 90 °, the valve will be fully open.

6. If butterfly valve is required to be used as flow control, the main thing is to correctly select the size and type of valve. The structure and principle of butterfly valve is especially suitable for making large diameter valve. Butterfly valve is not only widely used in petroleum, gas, chemical industry, water treatment and other general industries, but also in the cooling water system of thermal power station.

7. There are two kinds of butterfly valves commonly used: wafer butterfly valve and flange butterfly valve. The double clip butterfly valve is connected between two pipe flanges with stud bolts. The flange butterfly valve has flange on the valve, and the flange on both ends of the valve is connected to the pipe flange with bolts.

8. The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis, with the rotation angle between 0 ° and 90 °. When it rotates to 90 °, the valve will be fully open.

四、進口電動真空蝶閥技術參數：

◇尺寸：DN32-DN400
◇壓力等級：1.3×10-5Pa～3×105Pa
◇適用溫度：-20℃至150℃
◇連接方式：對夾，法蘭
◇驅動方式：蝸輪、氣動、電動
◇閥體：不銹鋼、碳鋼鍍鎳
◇密封：氟橡膠、丁腈膠

◇漏率：≤1.3×10-9Pa.M3/S

◇安裝位置：任意；

◇壽命：≥10000次。

◇ size: dn32-dn400

◇ pressure level: 1.3 × 10-5pa ～ 3 × 105Pa

Applicable temperature: - 20 ℃ to 150 ℃

◇ connection mode: clamp, flange

◇ driving mode: worm gear, pneumatic, electric

Valve body: stainless steel, carbon steel, nickel plated

◇ sealing: fluororubber, acrylic rubber

◇ leakage rate: ≤ 1.3 × 10-9pa.m3/s

◇ installation position: any;

◇ service life: ≥ 10000 times.