隔離帶模具 高速隔離帶模具 道路工程專用

隔離帶模具在進行加工的時候，需要了解的就是只有正確的操作模具，才可以制作出合格的預制件進行他的施工，常見的使用方式就是將模具按照預制的流程來進行他的加工，但是很多的工人會出現操作錯誤的情況，這樣預制件就不能夠很好的脫模了，下面來進行一些說明，到底應該怎樣去進行他的制作。公路隔離墩模具從倉庫中取出來之后，可能在表面會有灰塵的堆積，這是因?yàn)殚L(zhǎng)期的儲存，只需要將模具擦拭干凈就可以了，然后把模具的內部均勻的涂刷好脫模劑，因?yàn)楦綦x墩的使用范圍非常的廣，所以說在進行處理的時候，要進行檢查，看一下公路隔離墩模具的尺寸和工程的需求是否是一致的。泥漿是提前攪拌出來的，我們把泥漿緩緩的注入在公路隔離墩模具中就可以了，鋼模具的凝固性是非常強的，可以放心進行他的使用，并且在操作的時候也非常的安全。泥漿的注入會讓整個模具更加笨重，所以使用振動棒插入在泥漿中開始震動的操作，然后等待泥漿的自然風干晾曬就可以了。

When processing the mold of the isolation belt, we need to know that only the correct operation of the mold can produce qualified prefabricated parts for his construction. The common way of use is to process the mold according to the prefabrication process, but many workers will have operation errors, so that the prefabricated parts can not be well demoulded. Let's do the following Some instructions on how to make it. After the mold of the road isolation pier is taken out from the warehouse, there may be dust accumulation on the surface. This is because for long-term storage, it is only necessary to wipe the mold clean, and then evenly brush the mold interior with release agent. Because the use range of the isolation pier is very wide, so when processing, it is necessary to check the mold of the road isolation pier Whether the dimension of is consistent with the requirements of the project. The mud is stirred in advance. We can slowly inject the mud into the mold of the road isolation pier. The steel mold has a very strong solidity, which can be used safely, and it is also very safe during operation. Mud injection will make the whole mold more bulky, so use a vibrator to insert it into the mud to start vibration operation, and then wait for the mud to air dry and dry naturally.

隔離帶模具 高速隔離帶模具  使用壽命

每個不同的隔離帶模具都是有著自己的壽命，如果說長時間的錯誤使用模具，就會導致模具要多次的進行維修，而這樣也會讓隔離墩鋼模具的使用壽命下降，所以說我們每次的加工制作，都要注意好模具的保護。首先就是在灌漿之前，脫模劑的涂刷是不能夠省略的，如果沒有脫模劑可以使用機油或者是食用油來進行代替，這都是可以的，避免了泥漿和鋼模具的直接接觸，大家都知道隔離墩鋼模具在操作的時候，要在干燥的環境中間進行生產，同樣在生產的時候脫模劑也是起到了一個隔絕的作用，因?yàn)槟酀{是需要使用大量清水來進行攪拌的，長期和鋼模具進行接觸的話，會導致隔離帶模具出現生銹的風險。另外就是震動棒的使用，泥漿澆筑在模具中，其中會含有大量的氣泡，如果這些氣泡不能夠很好的排出干凈，那么就會讓生產出來的預制件是不合格的，可能會導致隔離墩表面出現大面積蜂窩形狀的氣孔，震動棒的體積較小，適合這種不易搬動的隔離墩鋼模具來進行他的操作。

Each different mold of isolation belt has its own life. If we use the mold wrongly for a long time, it will cause the mold to be repaired many times, which will also reduce the service life of the isolation pier steel mold. Therefore, we should pay attention to the mold protection every time we process and manufacture. First of all, before grouting, the application of mold release agent cannot be omitted. If there is no mold release agent, it can be replaced by oil or edible oil, which can avoid the direct contact between mud and steel mold. We all know that during the operation of steel mold of isolation pier, production should be carried out in the middle of dry environment, as well as in the production of mold release agent It plays an isolation role, because the mud needs to be stirred with a large amount of water. If it contacts with the steel mold for a long time, it will cause the risk of rust on the mold of the isolation belt. In addition, the use of vibrating bar. When the mud is poured into the mold, there will be a lot of bubbles. If these bubbles cannot be discharged well, the prefabricated parts produced will be unqualified, which may lead to a large area of honeycomb like pores on the surface of the isolation pier. The volume of the vibrating bar is small, which is suitable for the steel mold of the isolation pier that is not easy to move Do what he does.