![](/resources/assets/images/mobile.png)
![河北宏旭模具制造有限公司](https://img.zhaosw.com/upload/images/201912/26/df65138a-e348-432c-9a3a-993f09ea4266.jpg)
河北宏旭模具制造有限公司
主營產品: 護坡模具
宏旭定制-拱門護坡模具-拱門型護坡模具
價格
訂貨量(套)
¥109.00
≥5
店鋪主推品 熱銷潛力款
䀋䀔䀓䀐䀐䀒䀍䀍䀔䀍䀍
在線客服
宏旭定制 拱門護坡模具 拱門型護坡模具
高速拱形骨架護坡模具 拱形骨架護坡模具是按照對于高速公路、高鐵等現場澆筑需求而加工的,如何保證模板在施工現場的良好使用,而且可以在不變形的情況下多次使用,模板的質量成為關鍵所在。在使用時需要將原料澆灌進入到模具中,需要長時間的重復使用,為了增加利潤就需要減少成本,這就可以通過減少更換的頻率,需要在保存時注意,因?yàn)楸4娴沫h(huán)境直接影響到了使用的壽命。首先,在保存前要注意不能在保護層出現損壞時就進行保存,因?yàn)橹谱鞲咚俟靶喂羌茏o(hù)坡模具 拱形骨架護坡模具原料是使用的鋼板,鋼板在接觸到潮濕的空氣時是會很容易出現生銹的情況的,會對使用的壽命產生一定的影響。所以應該在保護層出現破損時及時的進行補充,盡量減少二者的接觸,可以很大程度上起到保護作用。在保存時應該注意不要放在潮濕的環境中,應該保持環境的干燥,并且應該避免陽光的直射,陽光的直射會很容易使鋼板的韌性下降,這樣在灌料時就會出現破裂的情況,這樣就會損壞了原料而無法得到產品。因?yàn)楸4娴沫h(huán)境空間有限,所以為了充分利用空間,模具是需要疊放保存的,但是疊放的數量不能太多,否則會導致下面的拱形骨架模具出現形狀上的變化,在使用時會很容易漏漿。
The high-speed arch skeleton slope protection mold is processed according to the site pouring requirements for expressways and high-speed railways. How to ensure the good use of the formwork in the construction site, and can be used repeatedly without deformation, the quality of the formwork becomes the key. When using, the raw materials need to be poured into the mold, which needs to be reused for a long time. In order to increase the profit, the cost needs to be reduced. This can be achieved by reducing the frequency of replacement. Attention should be paid to the preservation, because the preservation environment directly affects the service life. First of all, before preservation, it should be noted that the protective layer should not be preserved when the protective layer is damaged, because the raw material of the high-speed arched skeleton slope protection mold is the steel plate used. When the steel plate contacts with the moist air, it is easy to rust, which will have a certain impact on the service life. Therefore, timely supplement should be made when the protective layer is damaged, so as to minimize the contact between the two, which can play a protective role to a great extent. During storage, attention should be paid not to put it in a humid environment. The environment should be kept dry, and the direct sunlight should be avoided. The direct sunlight will easily reduce the toughness of the steel plate, which will cause fracture during filling, which will damage the raw materials and cannot obtain the products. Due to the limited environment space, in order to make full use of the space, the molds need to be stacked and saved. However, the number of stacked molds should not be too much. Otherwise, the shape of the arched skeleton mold below will change, and it will be easy to leak slurry in use.