套餐1

圣誕主題款

套餐2

星球混合款

預制縫隙式排水渠模具  縫隙式排水溝模具的材質既有塑料的也有鋼板的，根據具體圖紙要求，排水溝預制塊既有整體結構，也有分體結構，所以每一種模具都有自己的制作方案。 預制縫隙式排水渠模具  縫隙式排水溝模具的使用十分方便，與傳統磚砌排水溝相比，環保省料的同時又簡單快速。先組裝模具，用電動扳手將螺絲擰緊，檢查確認鋼板間緊密連接在一起之后在進行后續的灌漿操作以防止注入泥漿漏出。接下來需要在模具內刷上脫模劑，再將攪拌好的混凝土注入模具內，使脫模工作更快更省力，然后用振動棒或振動板震動模具中的混凝土直到?jīng)]有氣泡后放置陰涼平整處晾干，如果使用平模需要插入吊裝環后再晾置。混凝土完全凝固后，如果使用的是立模，只需用電動扳手將 預制縫隙式排水渠模具  縫隙式排水溝模具上的螺絲擰開，拆除模具取出混凝土預制件；如果使用的是平模，則需要配合使用行車?yán)痤A(yù)制件上的吊裝環取出混凝土預制件。按照不同的模具形式，工人在制作預制塊的時候需要注意上述的內容。The material of the prefabricated slotted drainage ditch mold is both plastic and steel plate. According to the specific drawing requirements, the prefabricated block of the drainage ditch has both overall structure and split structure, so each mold has its own manufacturing scheme. Compared with the traditional brick drainage ditch, the gap drainage ditch mold is not only environmentally friendly and material-saving, but also simple and fast. First assemble the mold, tighten the screws with an electric wrench, check and confirm that the steel plates are closely connected, and then carry out subsequent grouting operations to prevent the leakage of injected mud. Next, the mold shall be brushed with release agent, and then the mixed concrete shall be injected into the mold to make the release work faster and labor-saving. Then, the concrete in the mold shall be vibrated with a vibrating rod or vibrating plate until there are no bubbles. It shall be placed in a cool and flat place for drying. If the flat mold is used, it shall be inserted into the lifting ring before drying. After the concrete is completely solidified, if the formwork is erected, just use an electric wrench to unscrew the screws on the prefabricated slotted drain mold, remove the mold and take out the concrete precast parts; If the flat formwork is used, the crane shall be used to pull up the lifting ring on the precast parts and take out the concrete precast parts. According to different mold forms, workers need to pay attention to the above contents when making precast blocks.