高速防撞墻塑料模具在施工之前可以使用水來浸泡，因?yàn)榻葸^后的鋼模板的韌性會增加，所以能夠保持不變形，讓使用的壽命得到延長，而為了鋼模板的質量，這種模具通常不會和化學物質放在一起，而且在庫房里保存的時候要注意防火措施，要有明顯的禁火標志，這樣就能夠讓模具不會出現質變，當使用的時候鋼模具會承受很大額的荷載，所以要提高模具的耐用程度以及剛性，要將其控制在一個生產制作的范圍之內，作為重要的生產工具，它是可以循環使用的，不會造成資源的浪費，也能夠延續其壽命得到使用。

防撞墻模具設計說明往往是根據每個地區車流量、地形特點決定，固定規格的防撞墩不存在。高速防撞墻塑料模具要放在交通流交界處的，其作用是分隔對向或者同向的車流，并且禁止車輛左轉變換車道，使車輛有序行駛減少碰撞。這樣也防止了堵車，為交通管理人員帶來的極大的便利，還有就是防止行人任意橫穿馬路，通過這種方式，讓行人走人行道過馬路成為一種習慣。防撞墻模具承受的負荷比較大，所以我們使用鋼板鋼筋用來均勻分布承受的力量，有的時候也會采用預應力加固法讓模具更加穩固，這樣用的效果更好，在允許的范圍內不被破壞，不會出現變形。Before the construction of high-speed anti-collision wall plastic mold, water can be used to soak, because the toughness of the steel formwork after soaking will increase, so it can maintain no deformation and prolong the service life. For the quality of steel formwork, this kind of mold is usually not put together with chemical substances, and attention should be paid to fire prevention measures when it is stored in the warehouse, There should be an obvious no fire sign, so that the mold will not change qualitatively. When it is used, the steel mold will bear a large amount of load. Therefore, to improve the durability and rigidity of the mold, it should be controlled within a production range. As an important production tool, it can be recycled and will not cause a waste of resources, It can also extend its service life.

The design specification of the anti-collision wall mold is often determined according to the traffic flow and terrain characteristics of each area, and the anti-collision pier with fixed specifications does not exist. The plastic mold of high-speed anti-collision wall should be placed at the junction of traffic flow. Its function is to separate the opposite or the same direction of traffic flow, and prohibit vehicles from turning left to change lanes, so that vehicles can drive orderly and reduce collisions. This also prevents traffic jams, brings great convenience to traffic management personnel, and also prevents pedestrians from crossing the road at will. In this way, it becomes a habit for pedestrians to cross the road on the sidewalk. The load of the anti-collision wall mold is relatively large, so we use steel plate and steel bar to evenly distribute the bearing force. Sometimes we also use prestressed reinforcement method to make the mold more stable, so the effect is better, it will not be damaged within the allowable range, and there will be no deformation.