扭王字塊鋼模板使用步驟非常簡單，施工人員只要按照以下的步驟生產混凝土預制件，模具的使用壽命不但有著很大的保障，使用的時候也能很好的承受住來自混凝土帶來的巨大壓力，使用扭王字塊鋼模板生產混凝土預制件的時候會使用預制生產的生產方式生產，因為本身扭王字塊的使用數量就很多，所以會使用預制生產的生產方式生產。

使用介紹：

把工程需要的所有數量的扭王字塊全部生產出來之后然后運輸到施工現場之后，進行現場擺放使用使用扭王字塊鋼模板生產混凝土預制件的時候首先需要選擇一個干凈、干燥的場所生產混凝土預制件，然后在模具的內壁處均勻的刷上一層工業機油，避免模具出現粘連混凝土的現象，然后把提前攪拌均勻的混凝土全部倒入模具中。

加工注意事項：

使用振動棒把模具中的混凝土中產生的氣泡全部震動出來之后，等到模具中的混凝土完全凝固之后進行脫模就可以了，使用的整體制作時間很少，施工人員可以在有限的時間內完成生產任務，但是一定要等到模具中的混凝土完全凝固之后再進行脫模，這樣生產出來的混凝土預制件才會緊實、耐用、使用壽命延長The steps of using the steel formwork with twisted King's block are very simple. As long as the construction personnel produce the concrete prefabricated parts according to the following steps, the service life of the mould not only has a great guarantee, but also can withstand the huge pressure brought by the concrete. When using the steel formwork with twisted King's block to produce the concrete prefabricated parts, they will use the production mode of prefabricated production, Because there are a lot of zigzag blocks, we will use the production mode of prefabrication.

Introduction:

When using the steel formwork to produce the precast concrete, we need to select a clean and dry place to produce the precast concrete, and then brush a layer of industrial oil evenly on the inner wall of the mold, Avoid the phenomenon of adhesion of concrete in the mold, and then pour all the concrete mixed in advance into the mold.

Processing precautions:

After all the bubbles in the concrete in the mold are vibrated by the vibrator, demoulding can be carried out after the concrete in the mold is completely solidified. The overall production time is very short, and the construction personnel can complete the production task in a limited time, but demoulding must be carried out after the concrete in the mold is completely solidified, In this way, the precast concrete will be compact, durable and have a longer service life