Mechanical |
Format | Standard profile, half length, 4-lane PCI Express card |
Cooling method | Air-cooling, fanless |
Mounting | For insertion in a standard height, 4-lane or higher, PCI Express card slot |
Connectors | - 'BASE' on bracket:
- 26-position Shrunk Delta Ribbon (SDR) socket
- Camera Link Base connector
- 'MEDIUM/FULL'
- 26-position Shrunk Delta Ribbon (SDR) socket
- Camera Link Medium/Full/80-bit connector
- 'EXTERNAL I/O' on bracket:
- 26-pin 3-row high-density female sub-D connector
- I/O lines and power output
- 'INTERNAL I/O' on PCB:
- 26-pin 2-row 0.1" pitch pin header with shrouding
- I/O lines and power output
- 'POWER INPUT' on module:
- 4-pin MOLEX power socket
- 12 VDC power input for PoCL camera and I/O power
|
Dimensions | L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in |
Weight | 136 g, 4.80 oz |
Host bus |
Standard | PCI Express 1.0 |
Link width | 4 lanes |
Link speed | 2.5 GT/s (PCIe 1.0) |
Maximum payload size | 1024 bytes |
DMA | 32- and 64-bit |
Peak delivery bandwidth | 1,024 MB/s |
Effective (sustained) delivery bandwidth | - Up to 833 MB/s for a PCI Express payload size of 256 bytes and 64-bit addressing
- Up to 844 MB/s for a PCI Express payload size of 256 bytes and 32-bit addressing
- Up to 754 MB/s for a PCI Express payload size of 128 bytes and 64-bit addressing
- Up to 780 MB/s for a PCI Express payload size of 128 bytes and 32-bit addressing
|
Power consumption | Max. 9.9 W; Typ. 8.2 W (1.0 A @ 3.3V;0.41 A @+12V) |
Camera / video inputs |
Interface standard(s) | Camera Link 2.0 |
Connectors | Two Shrunk Delta Ribbon (SDR) Miniature Camera Link (MiniCL) |
ECCO - Extended Camera Link Cable Operation | ECCO+ |
Number of cameras | One 80-bit / 72-bit / Full / Medium / Base configuration camera |
Maximum aggregated camera data transfer rate | 6.8 Gbit/s (850 MB/s) |
Camera Link configuration | Base, Medium, Full, 72-bit, 80-bit Note: Unpacking to 16-bit and image reconstruction are not available for the 8x 10-bit variant of the 80-bit configuration. |
Camera Link clock frequency | From 20 MHz up to 85 MHz |
PoCL (Power over Camera Link) | Two independent PoCL SafePower compliant controllers with overload, over-voltage and short-circuit protection |
Camera types | - Grayscale and color (RGB and Bayer) cameras
- Area-scan and line-scan cameras
|
Camera pixel formats supported | Monochrome, Bayer, and RGB (PFNC names):- Mono8, Mono10, Mono12, Mono14, Mono16
- BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
- RGB8, RGB10, RGB12, RGB14, RGB16
|
Area-scan camera control |
Trigger | - Precise control of asynchronous reset cameras, with exposure control.
- Support of camera exposure/readout overlap.
- Support of external hardware trigger, with optional delay and trigger decimation.
|
Strobe | - Accurate control of the strobe position for strobed light sources.
- Support of early and late strobe pulses.
|
Line-scan camera control |
Scan/page trigger | - Precise control of start-of-scan and end-of-scan triggers.
- Support of external hardware trigger, with optional delay.
- Support of infinite acquisition, without missing line, for web inspection applications.
|
Line trigger | - Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
- Rate Converter tool for fine control of the pixel aspect ratio.
- Rate Divider tool
|
Line strobe | - Accurate control of the strobe position for strobed light sources.
|
On-board processing |
On-board memory | 128 MB (64 MB for image data) |