鐵路軌枕模具  高鐵軌枕模具，礦用軌枕模具廠長度：120cm、150cm、180cm，寬度：13cm、15cm、20cm，深度：14cm、15cm、16cm、18cm、 20cm等（可按圖紙定做）軌枕模具型號：50kg、60kg、70kg等，我廠可生產(chǎn)鐵路道軌模具、路軌模具、軌枕模具、枕木模具，道軌模具分為道軌塑料模具、道軌鋼模具。軌枕模具使用方法：首先在道軌模具內(nèi)壁噴一層柴油或是脫模劑，方便脫模，然后將攪拌好的混凝土或水泥灌入模具內(nèi)，盡量填滿每個縫隙邊角，其次在振動平臺上振動或用振動棒振搗，幾秒鐘即可， 最后將模具放在干燥的地方，等混凝土初期凝固后出模成型，約24小時左右即可。Railway sleeper mold high-speed rail sleeper mold, mining sleeper mold factory length: 120cm, 150cm, 180cm, width: 13cm, 15cm, 20cm, depth: 14cm, 15cm, 16cm, 18cm 20cm (can be customized according to the drawings) sleeper mold model: 50kg, 60kg, 70kg, etc. our factory can produce rail mold, rail mold, sleeper mold, sleeper mold. Rail mold is divided into Rail plastic mold and rail steel mold. Usage of sleeper mould: first, spray a layer of diesel oil or release agent on the inner wall of the track mould to facilitate demoulding, then pour the mixed concrete or cement into the mould to fill the corner of each gap as much as possible, then vibrate on the vibration platform or vibrate with a vibrator for a few seconds, Finally, put the mold in a dry place, wait for the initial setting of the concrete and then form the mold, about 24 hours.