

萊恩泵閥制造(珠海)有限公司
店齡5年 ·
企業認證 ·
廣東省珠海市
手機掃碼查看 移動端的落地頁
進口不銹鋼304過濾器使用效果比較-德國洛克
價格
訂貨量(臺)
¥2100.00
≥1
店鋪主推品 熱銷潛力款
莸莾莶莹获莸莶莻莼莶莻
在線客服

萊恩泵閥制造(珠海)有限公司
店齡5年
企業認證
聯系人
葉工
聯系電話
莸莾莶莹获莸莶莻莼莶莻
經營模式
生產商,
所在地區
廣東省珠海市
- 基本信息
- 品牌:德國洛克
- 型號:DE LOCKE
- 驅動方式:自力式
- 介質溫度:-40℃≈500℃℃
- 工作壓差:1.6~32Mpa
- 適用介質:水
- 壓力環境:常壓
- 貨號:20204201
- 用途:過濾
- 外型尺寸:中型
進口不銹鋼304過濾器使用效果比較-德國洛克
進口不銹鋼304過濾器性能范圍:
公稱通徑 DN15~DN500
公稱壓力 1.6~32Mpa 300PSI~5000PSI
適用溫度 -40℃≈500℃
驅動方式 自力式
連接方式 螺紋、法蘭、焊接
結構形式 Y型、T型、U型、一字型
閥體材質 304不銹鋼
適用介質 水、油品、蒸汽、天然氣、液化氣、氣體、液體以及某些腐蝕性液體等。
制造標準 德國洛克原廠標準
應用場合 電站、冶金、建筑、鍋爐、設備、管道、熱能、空調、消防、給排水、水處理、石油化工、造紙印刷廠。
進口不銹鋼304過濾器產品概述:
德國《DE LOCKE》洛克進口不銹鋼304過濾器(stainless steel 304 filter)是輸送介質的管道系列不可缺少的一種裝置,通常安裝在減壓閥、泄壓閥、定水位閥或其它設備的進口端,用來消除介質中的雜質,以保護閥門及設備的正常使用。
該過濾器具有結構先進,阻力小,排污方便等特點。適用介質可為水,油、氣。可按用戶要求制作濾網,其外型基本相同(Y型),內部件全部采用不銹鋼,堅固耐用。當需要清洗時,只要將可拆卸的濾筒取出,去除濾出的雜質后,重新裝入即可,使用維護極為方便。該過濾器體形小、濾眼細、阻力小、效果高、安裝檢修方便、成本低、并排污時間短,對一般小型號者,只需5-10分鐘。一般通水網為18-30目/cm2,通氣網為40-100目/cm2,通油網為100-300目/cm2。
Introduction of imported stainless steel 304 filter products:
The stainless steel 304 filter imported from Germany "de Locke" is an indispensable device in the pipeline series of conveying medium. It is usually installed at the inlet end of pressure reducing valve, pressure relief valve, constant water level valve or other equipment to eliminate the impurities in the medium and protect the normal use of the valve and equipment.
The filter has the advantages of advanced structure, small resistance and convenient discharge. The suitable medium can be water, oil and gas. The filter screen can be made according to the user's requirements. Its appearance is basically the same (Y type). All internal parts are made of stainless steel, which is solid and durable. When cleaning is needed, just take out the detachable filter cartridge, remove the impurities filtered out, and then install it again, which is very convenient for use and maintenance. The filter has the advantages of small size, fine filter hole, small resistance, high effect, convenient installation and maintenance, low cost, and short sewage discharge time. It only takes 5-10 minutes for ordinary small size filter. Generally, the water supply network is 18-30 mesh / cm2, the ventilation network is 40-100 mesh / cm2, and the oil supply network is 100-300 mesh / cm2.
進口不銹鋼304過濾器產品特點:
2、過濾器內腔設有三道加強筋,用于防止濾網變形,有效地緩解了由于過濾器內的污物過多而造成的內外高負壓力差。
3、濾網采用不銹鋼雙層網結構,堅固耐用,具有結構先進、流阻小、排污方便等特點。
4、過濾網頂端設有橡膠密封墊或金屬墊,極大地提高了其密封的可靠性
5、耐腐蝕、長壽命
6、清除雜物極其方便
7、易拆卸、方便清洗
8、過濾面積大、過濾功能強
9、流阻小、體積小、結構簡單、重量輕
10、濾芯網為不銹鋼制作
11、雙層網結構過濾網、堅固耐用
12、適用介質: 水、蒸汽、氣體、油品、硝酸類等腐蝕性流體。
Features of imported stainless steel 304 filter:
2. The inner cavity of the filter is equipped with three reinforcing ribs to prevent the deformation of the filter screen and effectively relieve the high negative pressure difference between the inside and outside caused by too much dirt in the filter.
3. The filter screen adopts stainless steel double-layer net structure, which is firm and durable. It has the characteristics of advanced structure, small flow resistance and convenient sewage discharge.
4. The top of the filter screen is equipped with rubber gasket or metal gasket, which greatly improves the reliability of its sealing
5. Corrosion resistance and long life
6. It's extremely convenient to remove debris
7. Easy to disassemble and clean
8. Large filtration area and strong filtration function
9. Small flow resistance, small volume, simple structure and light weight
10. The filter net is made of stainless steel
11. Double layer filter structure, strong and durable
12. Applicable media: water, steam, gas, oil, nitric acid and other corrosive fluids.
進口不銹鋼304過濾器訂貨須知:
A、若訂貨前還未選定型號,請向我們提供您的使用參數:
1.公稱通徑 2.產品型號 3.流體性質(包括公稱壓力、溫度、介質) 4.閥體、密封材料 5.連接方式
B、若已經由設計單位選定我公司的產品型號,請按型號直接向我司銷售部訂購
C、當使用的場合非常重要或管路比較復雜時,請您盡量提供設計圖紙和詳細參數,由我們德國洛克閥門技術員為您審核把關。
D、感謝您訪問我公司的網站〖〗,如有任何疑問.
您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!
