進口高溫過濾器德國洛克質量?jī)?yōu)異

進口高溫過濾器性能范圍：

適用溫度 -20℃≈600℃

公稱壓力 1.6～32Mpa     300PSI～5000PSI

公稱通徑 DN15～DN500 

驅動方式 自力式

連接方式 螺紋、法蘭、焊接   

結構形式 Y型、T型、U型、一字型

閥體材質 鑄鐵、球墨鑄鐵、鑄鋼、碳鋼、不銹鋼

適用介質 水、油品、蒸汽、天然氣、液化氣、氣體、液體以及某些腐蝕性液體等。

制造標準 德國洛克原廠標準

應用場合 電站、冶金、建筑、鍋爐、設備、管道、熱能、空調、消防、給排水、水處理、石油化工、造紙印刷廠。

進口高溫過濾器產品概述：

德國《DE LOCKE》洛克 進口高溫過濾器(high temperature filter)用于2.5MPA, 600℃以下高溫高壓氣、液體連接的硬管路系統的過濾器。不銹鋼濾芯采用錐形孔，均勻分布在濾芯四周側面，流體介質從錐形孔大端進小端出，流速加快，更易清洗濾芯內污物。

本過濾器結構合理，使用方便。適用水、油品、蒸汽、天然氣、液化氣、氣體、液體以及某些腐蝕性液體等中高壓介質。產品廣泛應用于水處理設備、化工設備、石化設備、石油設備、造紙?jiān)O(shè)備、采礦設備、電力設備配套等領域。

Introduction of imported high temperature filter products:
German "de Locke" imported high temperature filter is used for the filter of 2.5MPa, high temperature and high pressure gas and liquid connection hard pipeline system below 600 ℃. The stainless steel filter element adopts the conical hole, which is evenly distributed on the sides of the filter element. The fluid medium enters from the large end of the conical hole and exits from the small end, which speeds up the flow rate and makes it easier to clean the dirt in the filter element.
The filter has reasonable structure and convenient use. It is suitable for water, oil products, steam, natural gas, liquefied gas, gas, liquid and some corrosive liquids. Products are widely used in water treatment equipment, chemical equipment, petrochemical equipment, petroleum equipment, papermaking equipment, mining equipment, power equipment and other fields.

進口高溫過濾器產品特點：

1.與同等流量過濾器相比，結構緊湊體積小。

2.使用壓力范圍寬。

3.換濾芯方便，用戶可根據安裝空間，打開上蓋，更換濾芯，可以旋下外殼（先放油）從下面取下濾芯。

4.安裝固定方便：如用戶按標準流向安裝有困難時可拆下蓋上4個螺釘，把蓋轉動180度。這樣就改變了介質流動方向。

5.該過濾器設有旁通閥和壓差發訊裝置，雙重保護功能。當濾芯污染堵塞至進出口壓差值為發訊器調定值時，發訊器發訊，此時必須更換濾芯

Features of imported high temperature filter products:
1. Compared with the same flow filter, it has compact structure and small volume.
2. Wide pressure range.
3. It is convenient to change the filter element. According to the installation space, users can open the upper cover and change the filter element. They can screw down the shell (drain the oil first) and take down the filter element from below.
4. Easy to install and fix: if it is difficult for the user to install according to the standard flow direction, remove the four screws on the cover and turn the cover 180 degrees. This changes the direction of the medium flow.
5. The filter is equipped with bypass valve and differential pressure signal device, which has dual protection function. When the filter element is polluted and blocked until the pressure difference between the inlet and outlet is the set value of the transmitter, the transmitter sends a signal, and the filter element must be replaced at this time
 

進口高溫過濾器訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!