進口信號蝶閥德國洛克原裝

 

進口信號蝶閥結構特點：

1、小型輕便，容易拆裝及維修，并可以任意位置上安裝。

2、結構簡單、緊湊，90°旋轉啟閉迅速。

3、操作扭矩小，省力輕巧。

4、達到完全密封，氣體試驗泄漏為零。

5、選擇不同零部件材質，可適用多種介質。

6、流量特性趨于直線，調節好。

                                                                                 

進口信號蝶閥規格參數：

公稱通經：DN50～400mm

公稱壓力：1.0/1.6/2.5MPa

工作溫度：-10℃～-80℃

密封試驗：1.1倍公稱壓力

強度試驗：1.1倍公稱壓力

適用介質：水、油、氣

 

零件材質

1 閥體：球鐵、鑄鋼

2 閥軸：SUS410/SUS316

3 蝶板：球鐵噴塑、不銹鋼

4 閥座：EPDM，PTEE

5 襯套：青銅，聚四氟乙烯

6   密封圈：NBR、EPDM

7 圓墊片：SUS316/黃銅

8   對開環：SUS316/黃銅

9 擋圈：彈簧鋼

Specification parameters of imported signal butterfly valve:
Nominal meridians: dn50-400mm
Nominal pressure: 1.0/1.6/2.5mpa
Working temperature: 10 ℃ ～ -80 ℃
Sealing test: 1.1 times nominal pressure
Strength test: 1.1 times nominal pressure
Applicable medium: water, oil and gas
Part material
1 valve body: ductile iron and cast steel
2 valve shaft: sus410/sus316
3 butterfly plate: ductile iron spray plastic, stainless steel
4 seat: EPDM, PTEE
5 bushing: bronze, Teflon
6 sealing ring: NBR, EPDM
7 round gasket: sus316/ brass
8 pair open ring: sus316/ brass
9 retaining ring: spring steel
                                                                                    

進口信號蝶閥工作原理：

1、信號蝶閥由蝸輪蝸桿傳動裝置驅動轉軸及蝶板旋轉實現啟閉和控制流量。

2、旋轉蝸輪蝸桿傳動裝置手輪，使蝶板達到啟閉及調節流量的目的，手輪順時針方向旋轉為閥門關閉。

3、蝸輪蝸桿傳動裝置箱體內設置微動開關有兩種形式：

a、在傳動裝置箱體內設有開向、關向兩個微動開關，分別在閥門全開和關閉時動作，接通控制室“閥開”“閥關”指示燈源，使之準確顯示閥門開關狀態。

b、在傳動裝置箱體內設關向微動開關（蝶板全關位置為0°），當?shù)逵?/span>0°～40°位置時微動開關支作，輸出閥門關閉信號，40°～90°位置時另一對常閉可輸出閥門打開信號?？烧{(diào)整壓觸微動開關的凸輪，顯示蝶板所處的不同位置。

Working principle of imported signal butterfly valve:
1. Signal butterfly valve is driven by worm gear drive shaft and butterfly plate to realize opening and closing and flow control.
2. Rotate the worm gear handwheel to make the butterfly plate open and close and adjust the flow. The handwheel rotates clockwise to close the valve.
3. There are two types of micro switches in the gearbox of worm gear transmission:
a. Two microswitches are set in the transmission box, which are open and close, which operate when the valve is fully open and closed respectively. Turn on the indicator lights of "valve open" and "valve close" in control room to accurately display the valve switch status.
b. The transmission box is equipped with a close micro switch (the fully closed position of butterfly plate is 0 °), when the butterfly plate is from 0 ° ~ 40 ° position, the microswitch is supported, and the valve closing signal is output. When the position is 40 ° ~ 90 °, another pair of normally closed valve opening signals can be output. The cam of the micro switch can be adjusted to display the different positions of the butterfly plate.
                                                                               

進口信號蝶閥產品簡介：

德國洛克《DE LOCKE》進口信號蝶閥的作用就是在關閉時給控制器發出信號，說明支管碟閥被關閉了，支管不通。在信號蝶閥的頂部設有閥門啟閉電信號裝置，當閥門被誤關閉25％(全開度的四分之一)時，郵電局信號裝置便輸出被除數誤關閉的信號到消防中心，所以此蝶閥是消防自動噴水滅火系統的*配套產品。主要用于給排水，建筑消防等各系統管道上，優其在消防管路上。

Introduction to imported signal butterfly valve products:
The function of the imported signal butterfly valve of de lock in Germany Locke is to send a signal to the controller when it is closed, indicating that the branch valve is closed and the branch pipe is not available. The signal device of post and Telecommunications Bureau will output the signal that is closed by division and error to the fire center when the valve is closed by mistake 25% (one fourth of the total opening), so the butterfly valve is the best product for automatic fire sprinkler system. It is mainly used for water supply and drainage, building fire protection and other system pipelines, which is superior to fire pipe.
                                                                               

進口信號蝶閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!