進口保溫蝶閥德國洛克各種參數

 

進口保溫蝶閥結構特點：

1、采用三維偏心結構，閥座與蝶板幾乎無磨擦，具有越關越緊的密封功能及密封副磨損補償性。

2、密封圈為軟硬層疊式金屬片，具有金屬密封和彈性密封的雙重優點。

3、密封面采用堆司太立硬質合金，密封耐磨損，使用壽命長。

4、選用不同材料，無論在低溫和高溫、高壓情況下，均具有優良的密封性能，而可以制造成雙向密封型。

5、可根據用戶要求提供多種傳動裝置．

6、電動蝶閥可現場手動或遠距離集中控制，且能滿足計算機程控藝需要。

                                                                                 

進口保溫蝶閥規格參數：

公稱壓力或壓力級：PN1.0-4.0MPa、ANSI CLASS 150-300LB、JIS10-20K

公稱通徑或口徑：DN40～2000

連接方式：法蘭連接、對夾連接、對焊連接及凸耳對夾連接

適用溫度：-196℃～700℃

驅動方式：手動、蝸輪傳動、氣動、電動、液動、氣液聯動、電液聯動

閥體材料：HT200、WCB、ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti、CF8(304)、CF3(304L)、CF8M(316)、CF3M(316L)、Ti。

選用不同的材質，可分別適用于水、蒸汽、油品、硝酸、醋酸、氧化性介質、尿素等多種介質。

Specifications and parameters of imported insulation butterfly valve:
Nominal pressure or pressure class: pn1.0-4.0mpa, ANSI class 150-300lb, jis10-20k
Nominal diameter: Dn40 ～ 2000
Connection mode: flange connection, clamp connection, butt welding connection and lug clamp connection
Applicable temperature: - 196 ℃ ~ 700 ℃
Driving mode: manual, worm gear drive, pneumatic, electric, hydraulic, pneumatic hydraulic, electro-hydraulic
Valve body materials: HT200, WCB, zg1cr18ni9ti, zg1cr18ni12mo2ti, CF8 (304), CF3 (304L), CF8M (316), cf3m (316L), Ti.
Different materials can be used for water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea and other media.
                                                                                    

進口保溫蝶閥工作原理：

進口保溫蝶閥就是在傳統的蝶閥的基礎上，在外部焊接了一個金屬夾套，可以向這個夾套中沖入蒸汽、導熱油、冷卻水等這些在常溫下會凝固的高粘度、蒸汽或其它保溫、保冷介質，來起到保溫保冷的作用。夾套中的介質與管道中的介質的溫度是相同的，一旦外界的溫度過低或者過高的時候，高溫或者低溫首先接觸的就是夾套中的介質，正是因為這些介質，所以外界的溫度才不能傳遞到管道內的介質。所以能夠起到良好的保溫、保冷的作用。這樣一來介質就不會出現結晶、凝固、粘稠的現象，保證了介質的正常輸送。

Working principle of imported insulation butterfly valve:
The imported thermal insulation butterfly valve is based on the traditional butterfly valve. A metal jacket is welded on the outside. Steam, heat transfer oil, cooling water and other high viscosity, steam or other thermal and cold insulation media that will solidify at room temperature can be poured into the jacket to play the role of thermal and cold insulation. The temperature of the medium in the jacket is the same as that of the medium in the pipeline. Once the external temperature is too low or too high, the medium in the jacket is the first contact of high temperature or low temperature. It is precisely because of these media that the external temperature cannot be transferred to the medium in the pipeline. So it can play a good role in heat preservation and cold insulation. In this way, the medium will not appear crystallization, solidification, viscous phenomenon, to ensure the normal transportation of the medium.

                                                                               

進口保溫蝶閥產品簡介：

德國洛克《DE LOCKE》進口保溫蝶閥（Thermal insulation butterfly valve）也稱夾套蝶閥，是在普通三偏心金屬硬密封蝶閥的基礎上在閥體外部焊裝了金屬夾套，在保溫蝶閥的閥體兩側裝有夾套接口，可涵入蒸汽或其它過熱體以防止介質在常溫狀態下凝固或結晶。保溫蝶閥的法蘭較普通金屬硬密封蝶閥要大一到兩個規格，主要用于石油、化工、冶金、制藥等各類系統。

Introduction of imported thermal insulation butterfly valve products:
German rock "de lock" imported thermal insulation butterfly valve (thermal insulation butterfly valve) is also called jacketed butterfly valve. On the basis of ordinary three eccentric metal hard seal butterfly valve, metal jacketed is welded on the outside of the valve body. Jacketed interfaces are installed on both sides of the valve body of the thermal insulation butterfly valve, which can contain steam or other superheater to prevent the medium from solidification or crystallization at room temperature. The flange of heat preservation butterfly valve is one or two specifications larger than that of ordinary metal hard seal butterfly valve. It is mainly used in petroleum, chemical, metallurgical, pharmaceutical and other systems.
                                                                               

進口保溫蝶閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!