平時,在擦干之后還可以給電動餐桌涂上一層薄薄的高質量光蠟,像擦皮革一樣輕柔地擦試出光澤。這樣做不僅電動升降餐桌 了實木電動餐桌,還增加了它的光亮,不過選用光蠟一定要慎重,切不可使用含有化學腐蝕成分的低劣產品。
平時要注意不要讓堅硬的金屬制品或其他利器碰撞電動餐桌,保護其表面不出現碰傷痕跡。另外,夏季如室內泛潮,宜使用薄膠墊將電動餐桌同地面接觸的部位隔開,同時讓電動餐桌的靠墻部位同墻壁保持0.51厘米的距離間隙。
不同的電動餐桌有不同的電動升降餐桌 守則,傳統電動餐桌我們用傳統法去護理!昂貴一點的電動餐桌,我們也得需要花去護理!這樣他們才能發揮更大的作用!
People need an electric lifting table for health preservation in order to prolong their life! The car needs an electric lifting table to run farther and live longer! The house needs an electric lifting table in order to live longer and have higher appreciation value! How to lift the electric dining table?
Is a very deep knowledge, we need to study it slowly! The electric dining table used in our daily life also needs the electric lifting dining table to live longer!
Xiaobian has some experience on the electric table and the electric lifting table. The following Xiaobian teaches you some common sense of the electric table and the electric lifting table: first, you should pay attention to the cleaning and maintenance of the surface of the electric table.
The surface of solid wood electric dining table is coated with paint, which is particularly important for the maintenance of its paint film and electric lifting dining table. Once the paint film is damaged, it will not only affect the beauty, but also further affect the internal structure of the product, so the electric dining table should be kept clean.
Gently wipe off the floating dust on the surface of the electric dining table with a pure cotton dry soft cloth every day. Every once in a while, carefully wipe off the accumulated dust at every corner of the electric dining table with a wet cotton cloth that wrinks the moisture, and then wipe it dry with a clean dry soft fine cotton cloth.
At ordinary times, after drying, you can also apply a thin layer of high-quality polish wax to the electric dining table to rub it gently like leather. In this way, the electric lifting table not only improves the solid wood electric table, but also increases its brightness. However, we must be careful in the selection of light wax. We must not use inferior products containing chemical corrosion components.
Secondly, avoid removing stains with alcohol, gasoline or other chemical solvents.
If there is a stain on the surface of the solid wood electric dining table, do not wipe it vigorously. You can gently remove the stain with warm tea. After the moisture volatilizes, apply a little light wax on the original part, and then gently grind it for several times to form a protective film.
At ordinary times, pay attention not to let hard metal products or other sharp tools collide with the electric dining table to protect its surface from bruise marks. In addition, in case of indoor flooding in summer, it is advisable to use a thin rubber pad to separate the parts contacting the electric dining table from the ground, and keep the distance between the wall part of the electric dining table and the wall of 0.51 cm.
In addition, the solid wood electric dining table should be away from the heat source and direct sunlight. In winter, the electric dining table shall be placed about 1 meter away from the heating flow to avoid long-term baking, so as to prevent local dry crack and deformation of wood.
Outdoor sunlight shall be avoided as far as possible to expose the electric dining table as a whole or the Bureau for a long time. It shall be placed in a place that can avoid direct sunlight, or the sunlight shall be separated by transparent tulle curtains.


Different electric tables have different electric lifting table rules. We use traditional methods to care for traditional electric tables! We also need to take care of the expensive electric dining table! So that they can play a greater role!