產品性能Product performance

水平調節系統，操作平衡;

Horizontal adjustment system, operation balance;

全新支撐系統，便捷;

New support system, safe and convenient;

折疊式手柄，調節方便，符合人體工程學;

Folding handle, to make operation easy and safe;

雙磨盤交叉運轉，避免漏磨，操作平穩，效率高。

Double grinding wheel cross operation to avoid leakage, smooth operation and high efficiency.

地坪研磨機是集混泥土密封固化劑地坪、硬化地坪、環氧地坪處理、石材翻新、混凝土整平、打磨、等不同工藝的于一體的多功能機器。

Floor grinder is a kind of multi-function machine which can be used to treat epoxy floor、renew stone、hardener floor and so on.

可干濕兩用。適合各種天然、人造石材地面：環氧地坪、水泥地坪、環氧水磨石、環氧金剛砂地坪、固化劑地坪、PVC地坪的整平、磨拋清洗等各種需求

Dry and wet dual-use. It can be used in nautural and artificial stone floor: smooth or clean the epoxy floor, cement floor, epoxy terrazzo, epoxy emery floor, hardener floor, PVC floor.

優點 Advantage

磨頭交叉運行，研磨不留空隙，可安裝各類耗材，施工成本；

Do not leave any lap when the machine works. The machine can install many different kinds of consumable and reduce construction cost.

機體采用鋁金鑄件一體設計，精密度高、強度高、壽命長；

The body is designed with aluminum alloy castings, with high precision, high strength and long life；

可調節壓力系統，滿足不同施工需求。操作簡單；

Adjustable pressure system to meet different construction needs. Easy operation;

本機帶有大容量水箱，可接吸塵裝備，做無塵打磨施工，實現干濕兩用工作模式;

This machine contains a high-capacity water tank. It can connect with dust collection equipment which means it can realize no dust construction.

低 前置設計，運行平穩，可達成 施工;

Low center of gravity front design, running smoothly, can achieve the best construction effect;

各部件之間配有減震墊和減震彈簧，減小震蕩，增加操作舒適度和研磨平整度。水箱以及齒輪箱外殼采用玻璃鋼，硬度高，易清洗。轉換頭可選（金屬或塑料）。

The components are equipped with cushioning pads and shock absorber springs to reduce the shock, increase the operation comfort, and grind the flatness. Water tank and gearbox housing is made of fiberglass, which is high hardness, easy to clean. Converter can be selected(mater or plastic).

技術參數：

型號 Model 12T-630

功率 Power 7.5KW

電壓 Voltage 380V

頻率 Frequency 50HZ

電流 Electric 16A

工作寬度 Working Width 630*630MM

電機轉數 Motor Revolution 1460-1750R/MIN

磨盤轉速  Pin Disk Speed 0-1500RPM

重量 Weight 298KG

磨頭數量 Grinding Head Number 12PCS

水箱 Water Tank 25L

配選加重 Heavier Iron 0-25KG

湖南益陽 720型12頭地面打磨機 700型固化地坪研磨機 郴州破碎時是從混凝土路面的高處向低處破碎，以避免攤鋪瀝青混凝土后影響排水。在進行之前一定要進行路面的整個的調查，高壓水射流破碎p分損壞區域具有兩大特點：一是作業無振動， 路面冷銑刨機配備了可以銑削鋪層的轉子，和可以將銑削下來的物料輸送到運輸設備上的兩級皮帶輸料。所以對于施工的要求也是非常高的，在施工的中要配合機械設備的使用，只要要做好施工的相關人員的安排進行合理的布置在進行施工。