
英國PPM迷你無線室內空氣質量監測儀Mini-IAQ-Profile
價格
訂貨量(臺)
¥1000.00
≥1
店鋪主推品 熱銷潛力款
専將將將將尋尃尃尋尉尊
在線客服
產品名稱:迷你無線室內空氣質量監測儀
品牌:PPM
產地:英國
型號:Mini IAQ Profile
迷你無線室內空氣質量監測儀Mini IAQ Profile介紹:
Mini IAQ Profile 系統旨在提供建筑物室內空氣質量的可視化表示,作為與病態建筑綜合癥等條件相關的建筑物管理標準的一部分. 由于大量單元可以聯網,系統可以顯示不同位置選定的 IAQ 參數濃度隨時間的精確變化。Mini IAQ Profile Monitor 系統使用戶能夠控制和運行多個不同的無線 IAQ 采樣單元——所有這些單元都通過復雜可靠的 ZigBee 無線網狀系統進行通信。網狀網絡系統具有成本效益、易于安裝和使用簡單:組成網狀網絡的節點自動配置**信號路徑。無線網狀系統的其他優點是它是自我修復的,這意味著即使節點發生故障或連接變壞,網絡仍然可以運行。結果,形成了一個非??煽康木W(wǎng)絡。
Mini IAQ Profile Monitor 結合了多種先進的氣體傳感器技術來監測目標氣體,包括 NDIR、PID 和電化學,并提供四種主要配置,所有這些配置都可以聯網在一起。
配置1:
迷你無線電視
- —種無線htv解決方案,可用于監測建筑物中空氣中的甲醛含量。
- 還提供對該區域內的溫度和濕度水平的監測。
- 額外的繼電器選項允許控制警報和空調系統。
配置2:
迷你無線傳感器
- 內置溫度和濕度模塊,可配備多達3個IAQ參數傳感器。這些包括但不限于:
- 二氧化氮(NO2)
- —氧化碳(CO)
- 二氧化碳(CO2)
- 二氧化硫(SO2)
- 總揮發性有機化合物(TVoc)
- 臭氧(O3)
- 氨(NH3)
- 甲烷(CH4)
- 煙
- 運動傳感器
配置3:
迷你溫度和濕度
- 允許監澳建到叢Bio濕度水平。
- 可以與Zigbee 網狀網絡上的其他迷你無線單元和IAQ監視器聯網。
配置4:
迷你報警系統
- 帶有3個內置繼電器的專用無線系統,用于控制各種輸出,例如聲音/視覺警報系統和其他第三方系統。
- 還提供對該區域內的溫度和濕度水平的監測。
- 可以與Zigbee 網狀網絡上的其他迷你無線單元和IAQ監視器聯網
迷你無線室內空氣質量監測儀Mini IAQ Profile參數:
電源供電:12v DC 通過帶有 2.5mm 直徑插頭的外部 DC 適配器
工作范圍:0-30oC, 15-90%RH
尺寸:145mm x 145mm x 55mm(容納3個室內空氣質量參數傳感器以及溫度和濕度)
易于安裝:只需將隨附的 USB 模塊插入 PC,然后將電源連接到墻上的 IAQ 監視器。IAQ 監測裝置可通過 VESA 標準支架輕松安裝在墻上
軟件:內置 PPMonitor Wireless 專用管理軟件,用于管理 PC
***需要 Windows XP 專業版或 Windows 7 專業版***
采樣率:每分鐘**多 3 個參數數據值
低電量:2.4GHz ISM 頻段接收器
不同的天線選項:針對所需的不同網絡覆蓋
數據速率:250kbit/s 空中數據速率
頻道:16 個通道(802.15.4 通道 11 至 26)
力量:+3dBm 輸出功率(+5dB 升壓模式)
靈敏度:-98dBm 的高靈敏度(典型值為 1% 數據包錯誤率)
記憶:128k 閃存,5kbytes SRAM
PPMonitor 軟件

中文內容來自機器翻譯,內容僅供參考,實際內容可參考原廠介紹或以合同為準。
英文原文:
The Mini IAQ Profile system has been designed to give a visual representation of indoor air quality in buildings, as part of the buildings management standards in relation to conditions such as Sick Building Syndrome. Since a great number of units can be networked, the system can show prescise changes in concentration of selected IAQ parameters in various locations over time. The Mini IAQ Profile Monitor system enables the user to control and run several different wireless IAQ sampling units — all communicating together via the sophisticated and reliable ZigBee wireless mesh system. The mesh network system is costeffective, easy to install and simple to use: the nodes which make up the mesh automatically configure the optimal signal route. Other advantages of a wireless mesh system is that it is self healing meaning that the network can still operate even when a node breaks down or a connection goes bad. As a results, a very reliable network is formed. The size of the wireless mesh can be easily extended by simply adding new Mini IAQ Monitor units or even the larger IAQ monitor units, as each one is also a router for it's neighbours.
The Mini IAQ Profile Monitor incorporates a variety of advanced gas sensor technologies to monitor the target gases including NDIR, PID and Electrochemical and is available in four main configurations, all of which can be networked together.
Configuration 1:
Mini Wireless htv
- A wireless htv solution, which can be used to monitor airborne formaldehyde levels in a building.
- Also provides monitoring of temperature and humidity levels within the area.
- Additional relay option to allow control of alarm and air-conditioning systems.
Configuration 2:
Mini Wireless Sensor
Built in temperature and humidity module, and available with up to 3 IAQ parameter sensors. These include but are not limited to:
- Nitrogen Dioxide (NO2)
- Carbon Monoxide (CO)
- Carbon Dioxide (CO2)
- Sulphur Dioxide (SO2)
- Total Volatile Organic Compounds (TVOC's)
- Ozone (O3)
- Ammonia (NH3)
- Methane (CH4)
- Smoke
- Motion Sensor
Configuration 3:
Mini Temp & Humidity
- Allows for monitoring of temperature and humidity levels within a building.
- Can be networked with other mini wireless units and IAQ monitors on the Zigbee mesh network.
Configuration 4:
Mini Alarm system
- A dedicated wireless system with 3 inbuilt relays to control various outputs such as audible/ visual alarm systems and other third party systems.
- Also provides monitoring of temperature and humidity levels within the area.
- Can be networked with other mini wireless units and IAQ monitors on the Zigbee mesh network
Instrument Specifications:
Mains Powered:12v DC via external DC adaptor with 2.5mm diameter jack plug
Operating Range:0-30oC, 15-90%RH
Dimensions:145mm x 145mm x 55mm (Houses 3 IAQ parameter sensors as well as temperature and humidity)
Easy to Install:Simply plug the included USB module into the PC and connect up the power to the IAQ monitor on the wall. The IAQ Monitor Units are easily wall mounted via VESA standard bracket
Software:Built in PPMonitor Wireless exclusive management software for Managment PC
***Requires Windows XP Professional Edition or Windows 7 Professional Edition***
Sampling Rate:Up to 3 parameter data values every minute
Zigbee Alliance Mesh Networking System:
Low Power:2.4GHz ISM Band Reciever
Different Antennae Options:For the different network coverage required
Data Rate:250kbit/s over the air data rate
Channels:16 channels (802.15.4 Channel 11 to 26)
Power:+3dBm Output power (+5dB Boost mode)
Sensitivity:High sensitivity of -98dBm typical at 1% packet error rate
Memory:128k flash, 5kbytes of SRAM

