進口自力式調節閥-德國原裝品牌壓力 溫度 自力式流量調節閥廠家
進口自力式調節閥-德國原裝品牌壓力 溫度 自力式流量調節閥廠家
進口自力式調節閥-德國原裝品牌壓力 溫度 自力式流量調節閥廠家
進口自力式調節閥-德國原裝品牌壓力 溫度 自力式流量調節閥廠家
進口自力式調節閥-德國原裝品牌壓力 溫度 自力式流量調節閥廠家
進口自力式調節閥-德國原裝品牌壓力 溫度 自力式流量調節閥廠家

進口自力式調節閥-德國原裝品牌壓力-溫度-自力式流量調節閥廠家

價格

訂貨量(臺)

￥5600.00

≥1

聯系人 方同 經理

䀋䀐䀌䀏䀋䀒䀐䀏䀓䀒䀏

發貨地 廣東省深圳市
進入商鋪
掃碼查看

掃碼查看

手機掃碼 快速查看

在線客服

商品參數
|
商品介紹
|
聯系方式
訂貨號 SKU17007
加工定制 定制
貨號 17007
品牌 德國HANK
型號 SC4000
材質 碳鋼、不銹鋼
連接形式 螺紋、法蘭
公稱通徑 DN20-DN300
適用介質 水、油、氣
壓力環境 常壓
工作溫度 常溫
流動方向 單向
驅動方式 自力式
零部件及配件 閥瓣
形態 調節型
商品介紹
進口自力式調節閥無需外加能源，利用被調介質自身能量為動力源，引入執行機構控制閥芯位置，改彎兩端的壓差和流量，使閥前（或閥后）壓力穩定。德國漢克(HANK)自力式調節閥具有動作靈敏，密封性好，壓力設定點波動力小等優點，廣泛應用于氣體、液體及蒸汽介質減壓穩壓或泄壓穩壓的自動控制。
主要分類
1、直接作用式調節閥
又稱為彈簧負載式調節閥，其結構內有彈性元件：如彈簧、波紋管、波紋管式的溫包等，利用彈性力與反饋信號平衡的原理。
2、間接作用式調節閥
增加了一個指揮器（先導閥）它起到對反饋信號的放大作用然后通過執行機構，驅動主閥閥瓣運動達到改變閥開度的目的。
如果是壓力調節閥，反饋信號就是閥的出口壓力，通過信號管引入執行機構。
如果是流量調節閥，閥的出口處就有一個孔板（或者是其他阻力裝置）由孔板兩端取出壓差信號引入執行機構。
如果是溫度調節閥，閥的出口就有溫度傳感器（或者溫包）通過溫度傳感器內介質的熱脹冷縮驅動執行機構。
安裝注意事項
1、閥在氣體或低粘度液體介質中使用時，通常自力式調節閥為直立安裝在水平管上，當位置空間不允許時才倒裝或斜裝。
2、為便于現場維修及操作，調壓閥四周應留有適當空間。
3、當介質為潔凈氣體或液體時，閥前過濾器可不安裝。
4、調壓閥通徑過大(DN≥100 時)，應有固定支架。
5、位置實在不允許時，旁通閥(手動)可以省略(我們不推薦)。
6、閥組后根據需要用戶可選配止回閥、安全閥等。
7、閥在蒸汽或高粘度液體介質中使用時，通常自力式調節閥為倒立安裝在水平管上，冷凝器(蒸汽用自力式)應高于調壓閥的執行機構而低于閥前后接管。使用前冷凝器應灌滿冷水，以后約 3個月灌水一次。
Self-regulating valve without additional energy, the use of the media itself as the power source, the introduction of the actuator control spool position, change the pressure and flow at both ends of the bend, so that the valve before (or valve) pressure stability. Germany Hank (HANK) self-regulating valve with action sensitive, good sealing, pressure set point wave power is small, widely used in gas, liquid and steam medium pressure regulator or pressure regulator automatic control.
Main classification
1, the direct role of regulating valve
Also known as the spring-loaded control valve, the structure of the elastic components: such as springs, bellows, bellows-style package, the use of elastic force and feedback signal balance principle.
2, indirect acting control valve
Added a pilot (pilot valve) which acts to amplify the feedback signal and then through the actuator to drive the main valve flap to achieve the purpose of changing the valve opening.
If the pressure regulating valve, the feedback signal is the valve outlet pressure, through the signal tube into the implementing agencies.
In the case of a flow control valve, there is an orifice plate (or other resistance means) at the outlet of the valve which is introduced into the actuator by removing the differential pressure signal from both ends of the orifice plate.
If it is a temperature control valve, the valve outlet has a temperature sensor (or temperature package) through the temperature sensor medium thermal expansion and contraction drive actuator.
Installation Precautions
1, the valve in the gas or low viscosity liquid medium used, usually self-regulating valve for the vertical installation of the horizontal tube, when the location space is not allowed when the flip or ramp loading.
2, in order to facilitate on-site maintenance and operation, pressure regulator should be left around the appropriate space.
3, when the medium is clean gas or liquid, the valve before the filter may not be installed.
4, the regulator valve diameter is too large (DN ≥ 100 hours), should have a fixed bracket.
5, the position is not allowed, the bypass valve (manual) can be omitted (we do not recommend).
6, after the valve group according to the needs of users optional check valve, safety valve.

7, the valve in the steam or high viscosity liquid medium, usually self-regulating valve for inverted installation in the horizontal tube, the condenser (steam with self-type) should be higher than the regulator valve actuator and lower than the valve before and after the tube The Before use the condenser should be filled with cold water, after about 3 months irrigation time.


Phone: +86 (0) 755 / 83330270-400

Mobile: +86 (0) 13691839789

Fax: +86 (0)755 / 83330270 - 408

E-Mail: sales@hankchina.com、fang.tong@hankchina.com

URL:www.hankchina.com、www.ksbvalve.com

德國漢克（HANK）成立于1852年創建于門興格拉德巴赫（Monchengladbach）是位于德國北萊茵-威斯特法倫州首府杜塞爾多夫市以西的一座城市。于19世紀50年代初德國經濟快速發展，由于德國能源短缺，政府在節能方面加大力度，因此HANK(Trouble Less valve沒有故障的閥門)公司成立。漢克閥門是以生產高品質、先進的泵、閥、管件、測量及控制系統而享譽全球的跨國性生產企業，在全球幾十個國家擁有子公司及分支機構，公司產品涉及用途：石油、化工、電力、冶金、制藥、食品、水處理、市政給排水、天然氣、造紙、電子工業、樓宇、機械設備配套等領域。

GERMANY HANK VALVE LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Valve (Trouble Less Valve) was established.Hank valve is the world-famous transnational production enterprise,which produces high quality and advanced valve, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..

德國漢克（HANK）閥門的價值理念概括為：責任－遠見－創新。我們因自身的責任感、遠見及專注于創造*的解決方案和理念，而成為全球*的閥門制造商。

The conclusion of the valve concept in German Hank valve is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of valve manufacturer in the global.

聯系方式
公司名稱 深圳市凱士比閥門有限公司
聯系賣家 方同 （QQ：1246775303）
電話 䀍䀓䀔䀔-䀌䀋䀑䀒䀍䀌䀑䀒
手機 䀋䀐䀌䀏䀋䀒䀐䀏䀓䀒䀏
傳真 䀍䀓䀔䀔-䀌䀋䀑䀒䀍䀌䀑䀒
網址 http://www.ksbvalve.com
地址 廣東省深圳市