進口衛生級疏水閥-德國HANK原裝品牌快裝不銹鋼衛生級蒸汽疏水閥廠家
進口衛生級疏水閥-德國HANK原裝品牌快裝不銹鋼衛生級蒸汽疏水閥廠家
進口衛生級疏水閥-德國HANK原裝品牌快裝不銹鋼衛生級蒸汽疏水閥廠家
進口衛生級疏水閥-德國HANK原裝品牌快裝不銹鋼衛生級蒸汽疏水閥廠家
進口衛生級疏水閥-德國HANK原裝品牌快裝不銹鋼衛生級蒸汽疏水閥廠家
進口衛生級疏水閥-德國HANK原裝品牌快裝不銹鋼衛生級蒸汽疏水閥廠家

進口衛生級疏水閥-德國HANK原裝品牌快裝不銹鋼衛生級蒸汽疏水閥廠家

價格

訂貨量(臺)

¥1800.00

≥1

¥1700.00

≥10

聯系人 方同 經理

萦萫萪萩萦萧萫萩萭萧萩

發貨地 廣東省深圳市
進入商鋪
掃碼查看

掃碼查看

手機掃碼 快速查看

在線客服

商品參數
|
商品介紹
|
聯系方式
訂貨號 SKU31006
品牌 德國HANK
貨號 31006
型號 31006
材質 不銹鋼
連接形式 快裝
種類 疏水
公稱通徑 DN15-DN20
適用介質 食品、飲料、制藥
壓力環境 常壓
工作溫度 常溫
標準 德標
流動方向 單向
驅動方式 自動
零部件及配件 閥芯
商品介紹
進口衛生級疏水閥主要用于蒸汽系統中的凝結水、空氣和二氧化碳氣體盡快排出,同時最大限度地自動防止蒸汽的泄漏。
該閥安裝在蒸汽加熱設備與凝結水回水集管之間。開啟時,桶在底部,閥門全開。凝結水進入疏水閥后,流到桶底,充滿閥體,全部浸沒桶體,然后,凝結水通過全開閥門排至回水集管。蒸汽也從桶體底部進入疏水閥,占據桶體內的頂部,產生浮力。桶體慢慢升起,逐漸向閥座方向移動杠桿,直到完全關閉閥門??諝夂投趸細怏w通過桶體的排氣小孔,聚集在疏水閥的頂部。從排氣孔排出的蒸汽,都會因疏水閥的散熱而凝結。當進來的凝結水開始充滿桶體時桶體開始對杠桿產生一個拉力。隨著凝結水位不斷升高,產生的力不斷增加,直到能夠克服壓差,打開閥門。疏水閥閥門開始打開,作用在閥瓣上的壓差就會減小。桶體將迅速下降,使閥門全開。積聚在疏水閥頂部的不凝性氣體先排出,然后凝結水排出。水流從桶體流出時帶動污物一起流出疏水閥。凝結水排放的同時,蒸汽重新開始進入疏水閥,新的一個周期又開始了。
The CST Series is a 316L polished, stainless steel thermodynamic disc trap, that is compact with a lightweight design and Tri-Clamp end connections.
Though non-sanitary in the traditional sense, the exterior is polished to 20 Ra and can be used in clean room environments on plant steam, or non-validated clean steam applications. The thermodynamic action meets the requirements of quick response applications in the steam system. Condensate entry below the disc, concentric to the disc/seat ensures a clean parallel lift of the disc with reference to the seat, eliminating localized wear and tear.
The CSDT is ideal for fluctuating steam loads and pressures. It is virtually maintenance free with a one year replacement warranty.
Features
1、316L body construction
2、20 Ra μin (0,5 Ra μm) external mechanical finish (except at body cap junction)
3、Operates in any position
Specifications
Sizes: 1/2" (DN15) & 3/4" (DN20)
Ends: Tri-Clamp
Materials
Body: Casting, AISI 316L
Disc: AISI 316L
Internal Finish: As cast and machined
External Finish: 20 Ra μin (0,5 Ra μm)
Mechanical finish (except at body/cap junction)
Pressure Maximum Allowable: 227 psig (15,6 barg)
Temperature Maximum Allowable: 842°F (450°C)
Maximum operating back pressure at the outlet should not exceed 80% of the inlet.
Minimum differential pressure for satisfactory operation 3.6 psig.

Phone: +86 (0) 755 / 83330270-400

Mobile: +86 (0) 13691839789

Fax: +86 (0)755 / 83330270 - 408

E-Mail: sales@hankchina.com、fang.tong@hankchina.com

URL:www.hankchina.com、www.ksbvalve.com

德國漢克(HANK)成立于1852年創建于門興格拉德巴赫(Monchengladbach)是位于德國北萊茵-威斯特法倫州首府杜塞爾多夫市以西的一座城市。于19世紀50年代初德國經濟快速發展,由于德國能源短缺,政府在節能方面加大力度,因此HANK(Trouble Less valve沒有故障的閥門)公司成立。漢克閥門是以生產高品質、先進的泵、閥、管件、測量及控制系統而享譽全球的跨國性生產企業,在全球幾十個國家擁有子公司及分支機構,公司產品涉及用途:石油、化工、電力、冶金、制藥、食品、水處理、市政給排水、天然氣、造紙、電子工業、樓宇、機械設備配套等領域。

GERMANY HANK VALVE LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Valve (Trouble Less Valve) was established.Hank valve is the world-famous transnational production enterprise,which produces high quality and advanced valve, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..

德國漢克(HANK)閥門的價值理念概括為:責任-遠見-創新。我們因自身的責任感、遠見及專注于創造*的解決方案和理念,而成為全球*的閥門制造商。

The conclusion of the valve concept in German Hank valve is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of valve manufacturer in the global.

聯系方式
公司名稱 深圳市凱士比閥門有限公司
聯系賣家 方同 (QQ:1246775303)
電話 萨萭营营-萪萦萬萧萨萪萬萧
手機 萦萫萪萩萦萧萫萩萭萧萩
傳真 萨萭营营-萪萦萬萧萨萪萬萧
網址 http://www.ksbvalve.com
地址 廣東省深圳市