處理飲用水的話，含量低的聚合氯化鋁會有較多雜質和水不溶物，所以要求用高含量。特別是造紙，化妝品制作中更是要用高含量的。

處理飲用水必須用飲水級的，工業級的在檢測時不檢測重金屬，另外水不溶物也高于飲用水的，總的來說飲用水級的關乎人命，不能亂用，一定要是真正的飲用水級的，如果工業級的被用于飲用水，隱患很多。而且純度不同，工業用都是26-28%，飲用水用30%。

而污水處理的話，含量高低要求并不嚴格，含量低的不是太多就行，可以多投放些藥劑也可以達到預定的效果。

河南安家凈環?？萍加邢薰緦?zhuān)業生產聚氯化鋁，主要分為飲水級，工業級，生產工藝主要分為噴霧法，滾筒法，資源貧乏山區的水處理時，直接加入水箱或水池中，攪拌均勻后靜止放置，上清液使用。一般情況下，50kg的水使用1g噴霧干燥型聚合氯化鋁。首先將噴霧干燥型聚合氯化鋁溶于10%～30%的水溶液中，然后加入待處理水中。根據處理后水的濁度，可適當提高或降低耗水量。

與普通聚合氯化鋁相比，噴霧干燥型聚合氯化鋁具有較好的吸附性能、較大的絮凝塊、沉降效果和處理后的水質較好。一般噴霧干燥型聚合氯化鋁采用更加先進的生產工藝，噴霧干燥法生產的聚合氯化鋁也分為了飲水級聚合氯化鋁和工業級聚合氯化鋁以及食品級聚合氯化鋁。飲水級聚合氯化鋁主要用于人們的日常飲用水，工業級聚合氯化鋁主要用于工業廢水的處理，而食品級聚合氯化鋁多用于食品添加劑和醫用方面。

噴霧干燥型聚合氯化鋁的產品質量很多時候關系到人們的生命健康，因此，生產噴霧干燥型聚合氯化鋁具有明確而嚴格的國家標準，可以保證人們的健康和安全。

滾筒式聚氯化鋁 鋁含量一般,水不溶物高,多用于污水處理.

板框式聚氯化鋁 鋁含量高， 水不溶物低. 用于污水處理和飲用處理.

噴霧干燥聚氯化鋁 鋁含量高， 水不溶物低，溶解速度快，用于飲用水及更高標準水處理.

PAC聚氯化鋁由于噴霧干燥穩定性好，適應水域?qū)?，水解速度快，吸附能力?qiáng)，形成礬花大，質密沉淀快，出水濁度低，脫水性能好等優點，在同樣水質的情況下，噴霧干燥聚氯化鋁投加量減少，尤其在水質不好的情況下，噴霧干燥產品投量與滾筒干燥聚氯化鋁相比，可減少一半，不僅減輕了工人的勞動強度，而更重要的是減少用戶的制水成本。除此之外，用噴霧干燥產品可保證安全性，減少水事故，對居民飲用水非常安全可靠。When treating drinking water, polyaluminium chloride with low content will have more impurities and water insolubles, so high content is required. Especially in papermaking, cosmetics productio型。但是實驗時要選擇具有參考價值的污泥或廢水。廢水或者污泥的種類都有很多，那么安家凈就對廢水取樣進行一下說明，希望能給廣大買家提供便利。

1. 如果你是選擇城市污水又或者是工業廢水，那么你在進行污泥藥劑篩選時，取樣要取污泥濃縮池中的廢水，因?yàn)橐话氵@種廢水經過了之前很多道程序后各種濃度都很高。

現階段技術性最為老The flocculation process of polyaluminium chloride is simple. In the sewage treatment profession, flocculation is one of the oldest solid-liquid separation methods. Because of its wide applicability, simple processing technology and low treatment price, flocculation method is still widely used in drinking water, domestic sewage and industrial sewage treatment at this stage. Polyaluminium chloride (PAC) is an excellent inorganic macromolecule flocculant. It was first developed in Japan and put into industrial production in the 1960s. It is the most sophisticated flocculant with the highest sales volume at the present stage. PAC has the advantages of fast floc formation, good sedimentation performance, low alkalinity consumption in water, especially strong adaptability to changes in water temperature, pH value, turbidity and organic matter content. The whole process of flocculation of polyaluminium chloride is actually a destabilization process. The so-called destabilization is the process of destabilizing colloidal particles. The solid particles originally uniformly dispe

2. 需要起混凝或者加速沉淀作用的時候，污水應當選擇馬上就要投加藥劑是的廢水。

3. 你在選擇廢水時一定要選擇有意義的，如果你選擇了沉淀上層的清水，那么此次取樣就沒有任何意義。要盡量選擇下層的，這樣就聚丙烯酰胺產品的選型會有幫助。重要的化工產品，人們的認識中絕大多數的化工產品都具有一定的毒性和刺激性，對人們都會造成很大危害。那么今天來分析一下聚合氯化鋁的毒性問題。

      聚合氯化鋁一般情況下對人體是沒有毒性的，但是聚合氯化鋁具有一定的刺激性，會對人的皮膚和粘膜造成危害，一旦沾染聚合氯化鋁需要進行大量清水清洗，情況嚴重或不慎吞服需要及時就醫。聚合氯化鋁在有一方面會表現出毒性，主要是因?yàn)榫酆下然X中的鋁離子屬于重金屬離子，多人體會造成危害，影響人的大腦，嚴重會導致貧血、早衰、癡呆等病情。正常情況下使用聚合氯化鋁是不會對人們?cè)斐奢^大的危害的。n is to use high content.

Drinking water must be treated at drinking water level. Heavy metals are not detected at industrial level, and insoluble substances in water are also higher than drinking water. Generally speaking, drinking water level is related to human life and can not be used arbitrarily. It must be a real drinking water level. If industrial level is used for drinking water, there are many hidden dangers. And the purity is different, industrial use is 26-28%, drinking water is 30%.

And sewage treatment, the content requirements are not strict, low content is not too much, you can put more medicines can also achieve the desired effect.

Henan an Jia Jing Environmental Protection Technology Co., Ltd. specializes in the production of polyaluminium chloride, which is mainly divided into drinking water level and industrial grade. The production process is mainly divided into spray method and roller method.

Drum-type polyaluminium chloride is generally used for sewage treatment because of its high water insoluble content.

Plate-frame polyaluminium chloride has high content and low water insoluble. It is used for sewage treatment and drinking treatment.

Spray drying has high content of polyaluminum chloride, low insoluble substance and fast dissolution rate. It is used for drinking water and higher standard water treatment.

PAC polyaluminium chloride has the advantages of good stability in spray drying, wide adaptation to water area, fast hydrolysis speed and strong adsorption capacity. It has the advantages of large alum, high quality and fast sedimentation, low turbidity and good dewatering performance. Under the same water quality, the dosage of spray drying polyaluminum chloride is reduced, especially when the water quality is not good, the product volume of spray drying is compared with that of drum drying polyaluminum chloride. It can be reduced by half, which not only reduces the labor intensity of workers, but also, more importantly, reduces the cost of water production for users. In addition, spray drying products can ensure safety and reduce water accidents, which is very safe and reliable for drinking water.