進口偏心蝶閥德國洛克廠家直銷  

一、進口偏心蝶閥產品簡介：

德國《LOCKE》洛克進口偏心蝶閥（Eccentric butterfly valve）是為了解決同心蝶閥的蝶板與閥座的擠壓?jiǎn)栴}、由此產生了單偏心蝶閥、其結構特征為閥桿軸心偏離了蝶板中心、從而使蝶板上下端不再成為回轉軸心、分散、減輕了蝶板上下端與閥座的過度擠壓。但由于單偏心構造在閥門的整個 開關過程中蝶板與閥座的刮擦現象并未消失、在應用范圍上和同心蝶閥大同小異、故采用不多。

The eccentric butterfly valve imported by Locke in Germany is to solve the extrusion problem between the butterfly plate and the valve seat of the concentric butterfly valve, resulting in a single eccentric butterfly valve. Its structural feature is that the valve stem axis deviates from the center of the butterfly plate, so that the upper and lower ends of the butterfly plate are no longer the rotation axis, dispersed, and the excessive extrusion between the upper and lower ends of the butterfly plate and the valve seat is reduced. However, due to the single eccentric structure in the whole process of valve opening and closing, the scraping phenomenon between the butterfly plate and the valve seat has not disappeared, and it is similar to the concentric butterfly valve in the application scope, so it is rarely used.

二、進口偏心蝶閥主要參數：

1、公稱通徑：DN100-2000mm

2、公稱壓力：PN1.0-10.0Mpa

3、結構形式：三偏心

4、設計依據：GB                 

5、驅動方式：手動，蝸輪傳動，電動等

6、設計標準：GB/12238、API609、MSS.SP-68

7、結構長度: GB/T12221 ASMEB16.10、API609、MSS.SP-6

8、連接法蘭: JB/T79 JB/T82、GN/T9115 ASME B16.5、ASME B16.47

9、試驗和檢驗:JB/T 9092 API 1598

10、注：閥門連接法蘭及對焊端尺寸可根據用戶要求設計制造

1. Nominal diameter: dn100-2000mm

2. Nominal pressure: pn1.0-10.0mpa

3. Structural form: three eccentricities

4. Design basis: GB

5. Driving mode: manual, worm gear drive, electric, etc

6. Design standard: GB / 12238, API609 MSS.SP -68

7. Structure length: GB / t12221 asmeb16.10, API609 MSS.SP -6

8. Connecting flange: JB / t79 JB / T82, GN / t9115 ASME B16.5, ASME b16.47

9. Test and inspection: JB / T 9092 API 1598

10. Note: the size of valve connecting flange and butt welding end can be designed and manufactured according to the user's requirements

三、進口偏心蝶閥主要零件材料： 

閥體：WCB、CF8、CF8M、CF8C、CF3、CF3M

閥桿：1Cr13、2Cr13、1Cr18Ni9Ti、0Cr18Ni12Mo2Ti

蝶板組合件：WC+f4、WCB+不銹鋼復合件，WCB+F6、CF8、CF8M

軸套：Cu、PTFE+不銹鋼

填料墊：2Cr13

填料：柔性石墨

填料壓蓋：WCB、CF8、CF8M  

支架：WCB、CF8、CF8M、3、CF3M

Valve body: WCB, CF8, CF8M, cf8c, CF3, cf3m

Stem: 1Cr13, 2Cr13, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti

Butterfly plate assembly: WC + F4, WCB + stainless steel composite, WCB + F6, CF8, CF8M

Shaft sleeve: Cu, PTFE + stainless steel

Packing pad: 2Cr13

Packing: flexible graphite

Packing gland: WCB, CF8, CF8M

Bracket: WCB, CF8, CF8M, 3, cf3m