進口高真空蝶閥德國洛克LOCKE-DF27

一、進口高真空蝶閥產品簡介：

德國《LOCKE》洛克進口高真空蝶閥，適用于電力等行業，介質為蒸汽或空氣的真空管路上，作通流或截止用，是密封型蝶閥，具有嚴密性好、啟閉操作靈活的特點，密封圈采用特種橡膠制成，耐溫高，耐老化性好，使用壽命長。

進口真空蝶閥采用T形斷面的密封圈，適應高速蒸汽介質的工況，調整密封圈的壓緊程度，可獲得最佳密封與操作效果。由于閥門的使用范圍非常的廣泛，同一種閥門在不同的場合與工況有不同的搭配，如果您是非專業人士，歡迎您向本公司來電咨詢。本公司有專業技術人員為您服務！技術部電話：021-51870285

Locke high vacuum butterfly valve, imported from Germany, is suitable for electric power and other industries. The medium is steam or air on the vacuum pipeline, which is used for flow or cut-off. It is a sealed butterfly valve with good tightness and flexible opening and closing operation. The sealing ring is made of special rubber, with high temperature resistance, good aging resistance and long service life.

The imported vacuum butterfly valve adopts T-shaped section sealing ring, which adapts to the working condition of high-speed steam medium and adjusts the compression degree of sealing ring to obtain the best sealing and operation effect. As the valve is widely used, the same valve has different collocation in different occasions and working conditions. If you are a non professional, you are welcome to call our company for consultation. The company has professional and technical personnel for your service! Tel. of Technology Department: 021-51870285

二、進口高真空蝶閥主要技術性能：

■適用范圍：Apply Range 105～1.3×10-4Pa

■閥門漏率：Valve Leak Rate ≤1.3×10-4Pa.L/S.

■適用溫度：Applicable Temperature -25～+80℃(丁腈橡膠)  -30～+150℃(氟橡膠)

■安裝位置：Install the direction 任意

■主要零件材料Materials of Main Parts

■閥體、閥蓋、閥桿：Body, bonnet and stem 碳鋼或不銹鋼

■密封件：Sealing element 丁腈橡膠、氟橡膠。

■ application range: apply range 105 ～ 1.3 × 10-4Pa

■ valve leakage rate: valve leak rate ≤ 1.3 × 10-4pa.l/s

■ applicable temperature: applicable temperature - 25 ～ + 80 ℃ (nitrile rubber) - 30 ～ + 150 ℃ (fluororubber)

■ installation position: install the direction

Materials of main parts

■ body, bonnet and stem: body, bonnet and stem carbon steel or stainless steel

■ seal: sealing element NBR, Viton.

三、進口高真空蝶閥技術參數：

1、公稱通徑：DN15-600mm

2、公稱壓力：1.3×10-5～3×105Pa

3、適用溫度：-25~150℃

4、閥體：WCB碳鋼，不銹鋼304，不銹鋼316

5、閥座：氟橡膠，丁腈膠

6、適用范圍：水，污水，油品，氣，蒸汽

7、連接方式：對夾，法蘭等

1. Nominal diameter: dn15-600mm

2. Nominal pressure: 1.3 × 10-5 ～ 3 × 105Pa

3. Applicable temperature: - 25 ~ 150 ℃

4. Valve body: WCB carbon steel, stainless steel 304, stainless steel 316

5. Seat: Viton, acrylic

6. Scope of application: water, sewage, oil, gas, steam

7. Connection mode: clamp, flange, etc