品牌進口信號蝶閥認準德國洛克

一、進口信號蝶閥技術參數：

Product Name: imported signal butterfly valve product model: Locke

Driving mode: manual connection mode: wafer, flange

Applicable temperature: 180 ℃ sealing structure: soft sealing

Pressure range: 1.6Mpa nominal diameter: dn40-1500

Common materials: cast iron, cast steel, 304316, alloy steel, etc.

二、進口信號蝶閥產品特點：

1、小型輕便，容易拆裝及維修，并可以任意位置上安裝。

2、結構簡單、緊湊，90°旋轉啟閉迅速。

3、操作扭矩小，省力輕巧。

4、達到完全密封，氣體試驗泄漏為零。

5、選擇不同零部件材質，可適用多種介質。

6、流量特性趨于直線，調節性能好。

7、啟閉試驗次數多達萬次，使用壽命長。

8、凡使用閘閥、止回閥（球形截流閥）">截止閥、旋塞閥、膠管閥及隔膜閥的管路，特別在高層建筑消防系統及需要顯示閥門開關狀態的管線系統上，均可用該閥替換。

1、 Small and light, easy to dismantle and repair, and can be installed in any position.

2. The structure is simple and compact, and the 90 ° rotary opening and closing are fast.

3. Small operating torque, light and labor-saving.

4. Achieve full sealing and zero gas test leakage.

5. Select different parts and materials, which can be applied to a variety of media.

6. The flow characteristics tend to be straight and the regulation performance is good.

7. The number of opening and closing tests is up to ten thousand, and the service life is long.

8. Where gate valve, check valve (globe shut-off valve) "> stop valve, cock valve, rubber pipe valve and diaphragm valve are used, the valve can be replaced, especially in the fire protection system of high-rise buildings and the pipeline system that needs to display the valve switch status.

三、進口信號蝶閥工作原理：

1、信號蝶閥由蝸輪蝸桿傳動裝置驅動轉軸及蝶板旋轉實現啟閉和控制流量。

2、旋轉蝸輪蝸桿傳動裝置手輪，使蝶板達到啟閉及調節流量的目的，手輪順時針方向旋轉為閥門關閉。

3、蝸輪蝸桿傳動裝置箱體內設置微動開關有兩種形式：

a、在傳動裝置箱體內設有開向、關向兩個微動開關，分別在閥門全開和關閉時動作，接通控制室“閥開”“閥關”指示燈源，使之準確顯示閥門開關狀態。

b、在傳動裝置箱體內設關向微動開關（蝶板全關位置為0°），當?shù)逵?/font>0°～40°位置時微動開關支作，輸出閥門關閉信號，40°～90°位置時另一對常閉可輸出閥門打開信號?？烧{(diào)整壓觸微動開關的凸輪，顯示蝶板所處的不同位置。

1. The signal butterfly valve is driven by the worm gear transmission device to rotate the shaft and butterfly plate to realize opening and closing and control the flow.

2. Rotate the hand wheel of the worm gear transmission device to open and close the butterfly plate and adjust the flow. Turn the hand wheel clockwise to close the valve.

3. There are two types of microswitches in worm gear box:

a. There are two microswitches in the transmission box, open and close, which act when the valve is fully open and closed respectively, and turn on the indicator light source of "valve open" and "valve close" in the control room, so as to accurately display the valve switch status.

b. The transmission box is equipped with a close microswitch (Butterfly fully closed position is 0 °). When the butterfly plate is from 0 ° - 40 ° position, the microswitch is supported to output the valve closing signal. When the butterfly plate is from 40 ° - 90 ° position, another pair of normally closed can output the valve opening signal. The cam of the press touch microswitch can be adjusted to display the different positions of the butterfly plate.

四、進口信號蝶閥產品簡介：

德國《LOCKE》洛克進口信號蝶閥是國際先進技術而自行開發的中線型蝶閥，它具有結構簡單，密封可靠，開啟輕便、壽命長、維護方便等優點。故被廣泛地應用于給排水、建筑消防等系統各種管道上，尤其在消防管路中。本信號閥可明白無誤的顯示出閥門開關狀態，具有直觀、清晰、可靠的反映出消防系統中的工作狀態，所以廣泛、大量的適用于消防系統中。

Locke imported signal butterfly valve from Germany is a self-developed middle line butterfly valve with international advanced technology. It has the advantages of simple structure, reliable sealing, light opening, long service life and convenient maintenance. Therefore, it is widely used in water supply and drainage, building fire protection and other systems, especially in the fire pipeline. The signal valve can clearly display the opening and closing state of the valve, which can directly, clearly and reliably reflect the working state of the fire fighting system, so it is widely and widely used in the fire fighting system.