本機是我公司針對鋁門型材、塑料型材的切割開料。使用硬質合金鋸片，線速高，切割精度高；機架面板（工作臺）經過平面磨削加工，調節定位靠板可切任意角度。滾珠精密轉盤結構，令角度擺動靈活準確。擺動機頭連接精密軸承支座結構，切割高精度。

J300金王之星參數

1. 工作電壓：380v/220V.  

2. 電機功率：1.1kw.            

3. 主軸轉速：3600r/min.

4. 鋸片規格：φ305×φ25.4×3 mm.            

5. 鋸切范圍：140×80mm/100×100mm.

6. 定位長度：4000mm(隨機配置的定位桿).    

7. 工作臺面高度：100/750mm.

8. 主機重量：50kg.

9. 主機外形尺寸：650×560×680mm

   金王鋸片的鋸齒超硬鋒利，禁止碰撞、掉落地上，必須輕拿輕放。

   裝完金王鋸片后，必須確認鋸片的中心孔是否牢固地固定；然后，輕輕地用手推動鋸片確認鋸片轉動是否偏心晃動。

   必須把金王鋸片箭頭指示的切割方向與鋸臺旋轉方向?qū)?zhǔn)。嚴禁安裝反方向，方向裝錯會導致掉齒。轉盤鋸

   預轉時間：更換金王鋸片后，使用前需預轉一分鐘，觀察是否存在異常。確認切割機正常后，才能進行切割。

   切割前，必須確認金王鋸片的用途是否與被切割的材料一致。金王鋸片僅用作切割鋁型材的，不適宜切割不銹鋼或木材等其他材料。

J300 Electrically Operated Precise Turntable Cutting Machine

1.Product introduction:  This machine was popular product which developed in view of the pint-size customers and the flowing workers by our company in recent years. It has become one of our company best-selling products for its reasonable structure, fine materials and satisfying effect.

2.Product characteristic:

1. Ball bearing precision turntable structure makes angle swinging flexible and accurate.

2.Work table and the back’s slit is narrow, it is better for the chipping removing.

3. Swinging nose connection with the precision bearing branch structure makes the effect of cutting to be satisfying.

4. It is useful for flowing workers for its assembling and dismantling type and the leftable work table.